How To Replace The Battery In A Precision Garage Door Keypad

If you have a Precision garage door, chances are you have a keypad to open and close it. Over time, the batteries in the keypad will need to be replaced. This guide will help you replace the battery in your Precision garage door keypad, so you can keep your garage door secure and functioning properly.

Tools Needed

Before you begin, you'll need to make sure you have the following tools on hand:

• A flathead screwdriver
• A new battery
• A Phillips head screwdriver

Step 1: Locate the Keypad

The first step is to locate the keypad. It should be mounted on the wall near the garage door. It should look like a small box with a keypad and display screen. Make sure the power is off before continuing.

Step 2: Remove the Cover

Using a flathead screwdriver, remove the cover from the keypad. This will expose the interior of the keypad, as well as the battery compartment.

Step 3: Remove the Old Battery

Using a Phillips head screwdriver, remove the screws that secure the battery in the keypad. Once the screws are removed, you can pull out the old battery.

Step 4: Insert the New Battery

Take the new battery and insert it into the keypad. Make sure the positive and negative terminals are facing the correct way. Once the battery is in place, secure it with the screws you removed earlier.

Step 5: Replace the Cover

Once the battery is secure, replace the cover on the keypad. Make sure that all of the screws are tight, so the cover doesn't come off.

Step 6: Test the Keypad

Now that the battery is in place, you can test the keypad. Enter the code on the keypad and make sure the garage door opens and closes correctly. If it does, you can now close the garage door and you're finished.

Conclusion

Replacing the battery in a Precision garage door keypad is a relatively easy task. All you need is the right tools and a few minutes of your time. With the right tools, you should be able to finish the job quickly and easily.